Dry Beton Drills

Use of water is not ideal in every construction situation and these drills provide the solution.  Our new turbo Dry Beton segments does not longer require water cooling. 
Why Carat turbo Dry Beton can:

  • by using alternative materials in the segments that are more heat resistant
  • laser welding to assemble segments, 100% warranty against weld breakage
  • Diatex segments where each diamond is placed optimal
  • turbo segment for increased drilling speed

No more water needed
Where adding water throught a water head was always necessary when drilling into concrete, there is no more obligation for this with these drills. You can still use water to increase the efficiency of them.

Obligation to use a vacuum cleaner
If you do not want to use water, you have to connect a vacuum cleaner to the machine to extract dust and release the segments as much as possible.  
Less speed and efficiency than our wet drills
Our wet drills go 3 times faster than the Dry Beton drills. The efficiency of our Brilliant drills is also 4 times higher than the Dry Beton drills.
More noise and vibration than wet drilling

These drills should be used on diamond drilling machine with a vacuum cleaner connection and a soft impact function such as the A-1825, A-2225, A-3025 or A-3425.
In addition, we recommend to mount all of this on a suport regardless of the diameter.



When producing these segments the diamonds are placed like in a matrix. The distance between each diamond is identical and they are stacked in layers throughout the segment. After wearing one layer off, an entirely new layer will appear. Due to this process, each diamond is 100% utilized and the blade is sharp its whole life. Resulting in a significant increased lifespan and blade speed.



With SILENT blades a laser will cut into the carrier, afterwards these cuts will be filled with a silicone. This will result in reduction of vibration what will have a positive influence on the lifespan and noise production.


Silent +

SILENT+ blades are made of 2 thin carriers that are put together by an absorbing layer. This technology is the best to reduce vibration of diamond blades. Therefore these segments will give an excellent lifespan and hardly produce any noise.



Carat is for many years working intensively in the development of dust reduction during the use of diamond tools. On one side by doing changes on our diamond tools but also by the development of a full range of machinery and dust collectors.



Controtec is unique software that protects against electrical and mechanical overloading of the Carat drill motors.

The operator can see and feel when the motor is overloaded whereby the mechanical slipping clutch is less activated and maximum torque available at any speed.

Due to this is the drilling process faster, more efficient and have fewer repair and maintenance costs.


Blue-Glue + Box

The Blue Glue on our stripnails has two advantages:

  • the nail will float much more easy into the timber, in that way the resistance is reduced to the absolute minimum for the nailgun
  • during the shot of the nail the heat will shortly build-up by the friction between nail and wood. This will engage the adhesive effect of the Blue Glue


These nails are also delivered in a plastic box in that way they are very easy to manage. In the meanwhile they also get the optimum protection against moisture.